Customization: | Available |
---|---|
Type: | Basic Diesel Generator |
Installation Method: | Fixed |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Description
|
|||||
Specifications | |||||
1) Power range: 50kVA /40kw | |||||
2) Brushless Synchronous A. C. Alternator, | |||||
3) Stamford& Leroy somer Type of Electric Generator, | |||||
4) Three Phase optional, IP23, Class H, | |||||
5) Rated voltage 440V, 110-690V option | |||||
Engine specification | |||||
1.Model: 4TNV98T-GGE | |||||
2. Multi-cylinder in-line or veer engine, 4-stroke, direct injection | |||||
3. Naturally aspirated, turbocharged, water cooled or turbocharged with air intercooler | |||||
4. Machinery or electronic governing | |||||
5. Fuel injection pump | |||||
6. Electric motor starting system | |||||
7. Forged steel crankshaft, cast iron cylinder and replaceable wet type cylinder liner | |||||
8. Low discharge, and low fuel consumption | |||||
Alternator: Kanpor-Stamford UC224C/40 | |||||
Option with: Marathon, Leroy somer, | |||||
A) three phase brushless generator, self-excited, 4-pole, single bearing | |||||
B) AVR self-regulated, voltage regulation rate ≤ ± 1% | |||||
C) IP23 protection grade | |||||
D) Class H insulation | |||||
E) Radio interference restraining accords with stipulation of VDE0875-N and ISO8528 | |||||
F) Moistureproof, sand-proof, dustproof, salt-proof and vibration-proof | |||||
Control system:AMF20 | |||||
1. Automatic cutter which is suitable for the generator power | |||||
2. Turn on key | |||||
3. A device to measure the generators speed | |||||
4. Counter for measuring the Operating hours | |||||
5. Device to measure the current overload with a switched current | |||||
6. A device to measure the battery voltage | |||||
7. Voltmeter with a voltage exchanger | |||||
8. A device to measure the frequency | |||||
9. Thermostat to regulate the voltage | |||||
10. A device to measure the oil pressure | |||||
11. Alerting lamps indicating low and high temperature | |||||
12. Controller of the current increase and short circuit | |||||
13. Emergency stop button | |||||
MODEL
|
KPY55 | ||||
PRIME POWER (KVA/KW) | 50/40 | ||||
STANDBY POWER(KVA/KW) | 55/44 | ||||
Rated voltage(V) | 440/255 | ||||
Rated speed(rpm) | 1800 | ||||
Rated frequency(Hz) | 60 | ||||
Power factor | 0.8 | ||||
Ambient temperature() | 40 | ||||
Altitude(m) | 1000 | ||||
Connection type | 3 phase 4 wires | ||||
ENGINE MANUFACTURER | JAPAN YANMAR | ||||
Model | 4TNV98T-GGE | ||||
Rated Power(kW) | 50.1 | ||||
No. of cylinders & configuration | In-Line 4 cylinders | ||||
Method of operation | 4-stroke | ||||
Speed regulation | Electric governor | ||||
Starting system | DC 12V Electronic start | ||||
Cooling method | Closed-circuit cooling system | ||||
Total displacement(L) | 4.412 | ||||
Compression ratio | 18.0:1 | ||||
Bore×Stroke(mm) | 106*125 | ||||
100% Load fuel consumption(L/h) | ≤11 | ||||
ALTERNATOR MANUFACTURER | KANPOR | ||||
Number of Phase | 3 | ||||
Connection Type | 3Phase and 4Wires | ||||
Number of Bearing | 1 | ||||
Power Factor | 0.8 | ||||
Protection Grade | IP23 | ||||
Terminal | 12 | ||||
Winding/ Pitch | 100% Copper 2/3 Pitch | ||||
Cooling Fan | Cast alloy aluminum | ||||
Exciter Type | Brushless, Self-Exciting | ||||
Insulation Class, Temperature Rise | H/H | ||||
Telephone Influence Factor( TIF) | TIF <50 / THF<2% | ||||
Total Harmonic TGH/THC | <1.5% at no load / <5% at load | ||||
Voltage Regulation, Steady State | ≤±1% | ||||
Sustained Short-Circuit Current | 300%(3 in):10s | ||||
CONTROL SYSTEM | COMAP AMF20 |