Factory Direct Sales China Fawde Generator 125 kVA Diesel Genset Price

• After-sales Service: 1 Year or 1000 Working Hours
• Warranty: 1 Year or 1000 Working Hours
• Type: Basic Diesel Generator
• Installation Method: Fixed
• Stroke: Four Stroke
• Cooling Method: Water Cooling
• Model NO.: KPKA138
• Output Type: AC Three Phase
• Speed: HSS
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit, Emergency Crew
• Landuse Type of Unit: Low Noise Automation Type
• Excitation Mode: AC Rotating Exciter
• Transport Package: Plywood Case
• Specification: 2900x1050x1700mm
• Trademark: Kanpor
• Origin: Fujian, China(Mainland)
• HS Code: 8502120000
• Production Capacity: 300PCS Per Month

Product Description

1. GENERATOR DATA                               

Voltage Available: 

50Hz: 380-400-415V/220-230-240V;

60Hz: 220-380-416-440-480V/110-208-220-240V

Any special voltage is also available as client's request

Prime Power: 

Comply with GB/T2820-97(eqv.ISO8528).

Genset can run unlimitedly under certain power range.

One hour 10% over load in every 12 running hours is allowed;

Standby Power:

standby power is the limit value of maximum output for emergency use.

It is off-oil power,overloading is prohibited
2. MAIN SPECIFICATION 

Basic technical data
Engine Model					CA6DF2-17D
No. of cylinders					6
Cylinder arrangement					In-line
Cycle					4 stroke
Aspiration					Turbocharged
Cooling system					Water-cooled
Bore				mm	110 mm
Stroke				mm	125 mm
Compression ratio					17.5:1
Displacement				L	7.13 L
Dry engine weight				kg	700 kg
Dimension(L*W*H)				mm	1305*934*920
The Flywheel shell interface					SAE2-11.5''
Performance Data
Governed Engine Speed				r/min	1500
Continuous Power without Fans				kW	125
Standby Power				kW	138
Adaptive power station (kw)				kW	100
Steady state speed regulation rate				%	N/M
					0-3 / Electronical
Emission Standards					CN Stage
Noise Level				dB	≤114
Average effective pressure				mPa	1.40
Lubrication system
Lubricating oil capacity				L	24
Lubricating oil consumption				L/h	≤0.06
Fuel system
Fuel consumption PRP				kg/h	25.63
Fuel consumption Rate				g/kW·h
25% prime power				g/kW·h	255
50% prime power				g/kW·h	216
75% prime power				g/kW·h	206
100% prime power				g/kW·h	205
100% standby power				g/kW·h	206
Air intake system
Air consumption				m3/min	9.1
Maximum allowed intake pressure				kPa	6.3
Fuel calorific value					N/M
Exhaust gas discharge				m3/min	22.4
Exhaust temperature				ºC	460
(exhaust gas after turbine)
Exhaust heat				kw	88.2
Maximum allowed back pressure				kPa	6.7
Heat balance
Engine heat output				kw	10.0
Heat removal of coolant				kw	57.5
Heat dissipation of intercooler				kw	22.5
Cooling system
Fan Speed Ratio					1.49
Pump Flow head				L/s	3.6-6.8
Coolant capacity-engine				L	10
Fan diameter				mm	620
Fan speed				R/min	2235
Fan flow				m3/s/Pa)	3.8/500
Fan power consumption				kW	7
Coolant capacity-Radiator				L	22
Thermostat on / off temperature				ºC
Noted:Pump Flow / Speed head				L/min/m	220/2200-6.7
Electrical system
Auxiliary voltage (V)					24 V
Alternaotr (A)					55
Starter Motor (kw)					6
Start preheater (kw)					1.5
Number of teeth of flywheel ring gear					141
Power Calibration Regulations
1.The diesel engine performance data specified above are based on the atmospheric environment specified in the GB/T6072.1/ISO3046-1 standard. The atmospheric pressure is 100kPa, the ambient temperature is 25°C, and the air humidity is 30%. Fuel calorific value 42.7mJ/kg
2.Prime power refers to the output power that the diesel engine can run for a long time without time limit under this working condition
3.Standby power refers to that the diesel engine is allowed to work continuously for 1 hour under the limited power of fuel volume every 6 hours
Power correction
1.The diesel engine can be used without reducing the power when the altitude is 400m and the ambient temperature is less than 40ºC.
2.When the environment deviates from the standard, the operating power of the diesel engine shall be corrected according to the following table
Altitude < 3000m				%/m		4/500
Altitude>3000m				%/m		6/500
Ambient Temperature				%/ºC		2/5
Humidity				%		No correction
Fuel consumption rate
Unless otherwise specified, the allowable deviation of calibrated fuel consumption rate at rated power is + 5%

3. PRODUCT FEATURES
(1).Full control panel with power indicator light and oil light.

(2).Emergency shutdown for low oil pressure and high water temperature.

(3).Large fuel tank ensure continuous running.

(4).Low noise & vibration.

(5).Compact structure.

(6).Reliable performance.

(7).Easy for installation and maintenance.

(8).50Hz and 60Hz both are available for choice