• 2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set
  • 2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set

2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set

After-sales Service: Global Warranty
Warranty: 1 Year or 1000 Running Hours
Type: Self-Starting Diesel Generator
Installation Method: Fixed
Stroke: Four Stroke
Cooling Method: Water Cooling
Customization:
Diamond Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory, Group Corporation

Basic Info.

Model NO.
9L27/38S
Output Type
AC Three Phase
Speed
Medium Speed
Conditions of Use
Land Use
Usage
Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit
Ordinary
Excitation Mode
AC Rotating Exciter
Certificate
CE ISO SGS Soncap TUV
Voltage
220V/127V 380V/220V 400V/230V 415V/240V 480V/277V
Current
130.7
Engine Model
9L27/38s
Transport Package
Wraping Film
Specification
9112x1800x3899mm
Trademark
Kanpor
Origin
Fujian, China(Mainland)
HS Code
8502132000
Production Capacity
10PCS Per Month

Product Description

2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set1. GENERATOR DATA                               

Voltage Available: 

50Hz: 380-400-415V/220-230-240V;

60Hz: 220-380-416-440-480V/110-208-220-240V

Any special voltage is also available as client's request

Prime Power: 

Comply with GB/T2820-97(eqv.ISO8528).

Genset can run unlimitedly under certain power range.

One hour 10% over load in every 12 running hours is allowed;

Standby Power:

standby power is the limit value of maximum output for emergency use.

It is off-oil power,overloading is prohibited

2. MAIN SPECIFICATION 

Technical specification of Genset
1) Nominal maximum continuous rating:  
2) Output on flywheel at 720r/min: 3200 kW
3) Output on terminals of alternator: 2970 kW
4) Frequency:       60 Hz
5) Voltage:          13.8 kV
6) Dimension:   9112x1800x3899mm
7) Dry mass:         64700kgs
 
Technical specification of Engine
Model 9L27/38S
Type Single acting, 4-stroke, trunk piston, direct injection, turbocharger, charge air cooler, L type, not reversal medium speed engine.
Cylinder bore (mm) 270
Piston stroke (mm) 380
Direction of engine rotation Clockwise, viewing from flywheel end
Number of cylinders 9
Max. continuous output/rated speed 3200 kW, 720 r/min
Mean effective pressure,bar 24.9
Max. combustion pressure,bar 190
Fuel oil specification 0# diesel oil,see attachment xx
MDO
Note :Use GB252 0# or -10# grade diesel oil on shop test.) MGO
Low sulphur fuel oil
Specific fuel oil consumption (SFOC) at MCR, g/(kWh) 187+5% 1)2)3)4)
Specific fuel oil consumption (SFOC) at 85% MCR g/(kWh) 186+5% 1)2)3)4)
Lub.oil specification SAE 40
Lub.oil consumption, g/(kW.h) 0.6+20%
NOx emission World Bank 2007/2008
1460 mg/Nm³ NOx
remark:
1) The SFOC is given in accordance with ISO 3046/1 2002 condition and using diesel oil with lower calorific
 value of 42700 kJ/kg:
  intake air temperature: 25oC
  barometric pressure: 1 bar
  cooling water temp. upstream charge air cooler: 25oC
 charge air temperature before cylinder: 43oC
  relative humidity: 30%.
2) With built-on pumps, the consumption will be increased by: 
Additions to fuel consumption (g/kWh)
load% 100 85 75 50 25
Cooling water pump 1 1.5 1.5 2 4
Lub.oil pump 2 2.5 3 4 8
3) For operation with MGO, SFOC will increased by 2g/(kWh)
4) Exhaust gas back pressure after TC>30mbar: every addition 1 mbar, +0.05 g/kWh
 
Technical specification of Alternator
1) Brand: Seimens or equivalence
2) Mode: Marine-use brushless three-phase synchronous
3) Voltage: 13.8 kV
4) Frequency: 60 Hz
5) Speed: 720 r/min
6) Power factor: 0.8 lagging
7) Continuous Power: 2500kW
8) Type of construction: two bearing, sleeve bearing
9) Rotation: anti-clockwise (seen form alternator driven end)
10) Bearing: Double sleeve bearing, with temperature sensor Pt1000 (2pcs/alternator) and counter coupling
side bearing temperature thermometer(1pc/alternator)
11) Degree of protection: IP23, terminal box:IP44
12) Cooling type: Water cooling
13) Insulation: F class
14) Temperature rise : F class
15) Radio interference suppression: N (VDE standard)
16) Anti-condensation heater: AC 220V
17) 2×3 Pt1000 sensors in stator-winding (1 set is spare)
18) Manual voltage regulator for switchboard mounting, 1set/engine, loosely supply
19) Parallel running
20) Automatic voltage regulator (AVR)
21) Cable glands to be confirmed by owner
22) With cooling water leakage alarm
23) Differential current transformer :6ea/alternator(3ea: mounted on alternator, 3ea: mounted on MSB)
 

3. PRODUCT FEATURES
(1) Full control panel with power indicator light and oil light.

(2) Emergency shutdown for low oil pressure and high water temperature.

(3) Large fuel tank ensure continuous running.

(4) Low noise & vibration.

(5) Compact structure.

(6) Reliable performance.

(7) Easy for installation and maintenance.

(8) 50Hz and 60Hz both are available for choice

2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set2.5MW 2500kw Continuous Power 13.8kv 60Hz Diesel Generating Set

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now